| Product Condition | New original or used original. Please confirm the condition with us before ordering. |
| Shipping Information | Worldwide shipping via DHL, FedEx, and UPS — 3-5 working days to most destinations. Packed with protective film and a reinforced carton. |
| Buyer Benefits |
|
| Item Location | Ships from Shanghai, China. Lead time confirmed with your inquiry. |
| Payment Information | PayPal, T/T, and Alibaba Trade Assurance accepted. Send your inquiry for a quotation. |
12,000+ parts in stock,Tested before shipping,Reply within 24 hours
InquiryABB 3HAC024479-001 is the HARN-XS5 CP/CS SC harness for the ABB IRC5 controller cabinet — a 1.69 m pre-terminated wiring harness that carries customer power and customer signal between the XS5 control module and the external connection on the cabinet front. It arrives with the connector and the terminal blocks fitted, so it replaces as one unit. Send us your controller label and we will confirm the match before you order.
| Category | Wiring harness for the ABB IRC5 controller cabinet (CP/CS) |
| Brand | ABB |
| Article Number | 3HAC024479-001 |
| ABB Product Name | Harn-XS5 CP/CS SC |
| Product ID | 95055 |
| Function | Carries customer power and customer signal from the XS5 control module to the external customer power/signal connection on the cabinet front panel, so the cell’s own signals and supply reach the robot, an external axis or a customer panel through one pre-terminated harness. |
| Connection Point | ABB’s IRC5 manual lists the customer power/signals external connection on the cabinet front panel as XS.5 on the single cabinet and XS.5 on the control module of the dual cabinet. On the robot side the same CP/CS pair is identified as R1-CP/CS in the IRC5 circuit diagrams. |
| Construction | Pre-terminated assembly supplied with the cabinet connector and the terminal blocks fitted, ready to route. A 1.69 m run in a multi-conductor shielded jacket. |
| Length | 1690 mm |
| Net Weight | 0.66 kg (gross weight 0.66 kg) |
| Dimensions | 1690 mm (depth) × 35 mm (height) × 90 mm (width) |
| Customs Tariff Number | 85444290 |
| Minimum Order Quantity | 1 piece |
| Selection Rule | Match the controller label on your cabinet (M2004 or M2000) and the CP/CS configuration. CP/CS harnesses are position-specific within the cabinet, so the same length does not mean interchangeable — send us the label and we will confirm the article. |
| Related Harness Lengths | ABB lists other CP/CS cable lengths for the same option family, including 22 m and 30 m runs. Ask us if the 1.69 m cabinet harness is not the length your cell needs. |
The CP/CS connection is the point where the cell’s own world enters the controller. ABB routes it through a defined harness rather than field-wired terminals so the customer power and customer signal conductors arrive at the XS.5 connection on the cabinet front panel on a shielded, pre-terminated assembly. That matters for two reasons. Signal integrity: the customer signals share a cable run with supply conductors, so the shield and the jacket construction are what keep the controller’s I/O from picking up noise from the very cables that feed it. Serviceability: because the harness is a defined article with its connector and terminal blocks already fitted, a failed run is replaced as one part rather than re-terminated conductor by conductor on site.
The harness is position-specific. XS5 means the XS5 control module generation, CP/CS means the customer power and customer signal pair, and SC is ABB’s suffix for the cabinet variant. Each of those identifies one position in one cabinet, which is why the article number and the controller label are the only reliable way to select it — two harnesses of the same length can still be wired differently at the terminal blocks.
Installing and handling it — what to check:
Send us the controller label on your cabinet, the article number on the old harness, and the quantity you need. We will confirm the matching article and give you a quotation.
If you have any suggestions, please contact us
Contact Us