All Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

All Small Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

ABB 3HAC058665-001 DSQC1032 Analog I/O Add-on for IRC5 / OmniCore

Product Condition New original or used original. Please confirm the condition with us before ordering.
Shipping Information Ships from Shanghai, China. Delivery lead time: 3-5 working days after order confirmation. Worldwide delivery by DHL / FedEx / UPS in anti-static protective packaging.
Buyer Benefits
  • ABB article 3HAC058665-001, catalogued as "DSQC1032 Analog add on" — the analog add-on of the ABB scalable Local I/O system for IRC5 and OmniCore controllers.
  • Two numbers, one module: DSQC1032 and 3HAC058665-001/00 appear together on the unit nameplate, so an older parts list still finds the right part.
  • Four analog inputs and four analog outputs with 12-bit resolution, as stated in section 2.3.2 of the ABB Scalable I/O application manual.
  • ABB publishes Sweden (SE) as the country of origin, customs tariff number 85389091, 0.1 kg net and gross weight and a minimum order quantity of 1 piece for this article.
  • Base device required: DSQC1030 (3HAC058663-001) is supplied separately and connects to the add-on by fiber; the analog add-on cannot run on its own.
  • Connectors are not included: ABB's data sheet states the module is delivered without connectors and lists connector set 3HAC060925-001 as a separate article. Add it when the existing connectors are not reusable.
  • Same-family selection: DSQC1031 is the digital add-on and DSQC1033 is the relay add-on. Select by signal type and confirm by the number on the fitted module.
  • After the module is exchanged, configure and verify the I/O: lock out and tag out the cabinet, use a grounded wrist strap, back up the controller configuration in RobotStudio or on the FlexPendant, fit the module and connectors, restart the controller, then check that the base device addresses the module and that all four analog inputs and outputs read correctly.
  • Supplied as new original or used original; we confirm the condition with you before you order.
  • Request a quote for current pricing and lead time – send the number on the module label (3HAC058665-001 or DSQC1032), the controller model and your I/O configuration, and we confirm the match before you order.
Item Location Ships from Shanghai, China.
Payment Information PayPal / T/T / Alibaba Trade Assurance.
  • Description
Can’t Find Your Part?

12,000+ parts in stock,Tested before shipping,Reply within 24 hours

Inquiry

ABB 3HAC058665-001 DSQC1032 Analog I/O Add-on for IRC5 / OmniCore

3HAC058665-001 is the ABB DSQC1032 Analog add on, the analog add-on module of the ABB scalable Local I/O system for IRC5 and OmniCore controllers. ABB's catalogue description, invoice description and product name all read "DSQC1032 Analog add on", and the nameplate on the unit carries both DSQC1032 and 3HAC058665-001/00. It provides four analog inputs and four analog outputs and must be paired with a DSQC1030 digital base device. ABB delivers the module without connectors: the connector set 3HAC060925-001 is a separate article. Send us the number on the module label, the controller model and your I/O configuration, and we confirm the match before you order.

Specifications

Part Number 3HAC058665-001
DSQC Designation DSQC1032. Both numbers appear together on the unit nameplate, so an older parts list finds the right module either way.
Product Name DSQC1032 Analog add on (ABB catalogue description, invoice description and product name)
Product Type Analog add-on module for the ABB scalable Local I/O family. It processes continuous process signals for the controller's Local I/O system.
I/O Configuration 4 analog inputs and 4 analog outputs, 12-bit resolution, as stated in section 2.3.2 of the ABB Scalable I/O application manual.
System & Compatibility ABB scalable Local I/O for IRC5 and OmniCore controllers; ABB places this spare part under Robotics → Controllers → IRC5. Confirm the controller model and the I/O configuration before ordering.
Base Device Required DSQC1030 digital base device (3HAC058663-001), supplied separately. The analog add-on cannot operate on its own; it is connected to the base device by fiber.
Connector Set ABB's data sheet states: "DSQC 1032 is delivered without connectors. Connector set can be purchased separate, 3HAC060925-001." The connector set is a different part from this module.
ABB Published Data For 3HAC058665-001, ABB publishes Sweden (SE) as the country of origin, customs tariff number 85389091, 0.1 kg net and gross weight and a minimum order quantity of 1 piece. The version and paperwork for the module in your quotation are confirmed with you before the order is placed.
Condition New original or used original. Please confirm the condition with us before ordering.

Three numbers cause most of the mix-ups here: DSQC1032 and 3HAC058665-001 are the same module, DSQC1030 is the base device this add-on must be paired with, and 3HAC060925-001 is the connector set that ABB does not include in the box. Send us the number on your module label, the controller model and your I/O configuration, and we confirm the parts before we quote.

Industrial Applications

  • Adding analog I/O to ABB IRC5 and OmniCore robot controllers in cells that use continuous process signals.
  • Interfacing pressure transducers, temperature sensors, proportional valves and similar process peripherals with the controller Local I/O system.
  • Extending an existing scalable Local I/O station by fitting an analog add-on alongside the DSQC1030 digital base device.
  • Force, pressure and flow monitoring in welding, dispensing, assembly and process-control workcells.
  • Replacing a failed analog add-on in an installed I/O station without changing the digital base or the rest of the chain.

Design Purpose

  • The analog member of the ABB scalable Local I/O family, alongside the DSQC1030 digital base device, the DSQC1031 digital add-on and the DSQC1033 relay add-on.
  • Four analog inputs and four analog outputs, so continuous signals are handled without occupying digital I/O points.
  • An add-on form factor that mounts to the base device and takes its power and communication through that connection.
  • A published ABB article number with a defined connector set and base device, so the I/O station is ordered as the correct set of parts.
  • A 0.1 kg module that one engineer can fit during a planned controller stop, with anti-static handling.

Common Failure Modes

  • After the module is exchanged, configure and verify the I/O — lock out and tag out the cabinet, use a grounded wrist strap, back up the controller configuration in RobotStudio or on the FlexPendant, fit the module and its connectors, restart the controller, then check that the base device addresses the module and that all four analog inputs and four analog outputs read correctly. Record the new configuration after the restart.
  • The base device cannot detect the add-on — with the power off, check the fiber link between the module and the DSQC1030 base device for a loose or contaminated connection and confirm the base device is present.
  • Analog signal drift or reduced accuracy — inspect wiring for electrical noise, wrong polarity or a mismatched signal range on the inputs and outputs before ordering a new module.
  • ESD damage or oxidised connectors from improper handling — use a grounded wrist strap and have qualified personnel install the module.
  • Only the module is ordered when the connectors are missing — ABB delivers DSQC1032 without connectors. Add connector set 3HAC060925-001 when the existing connectors are not reusable.
  • The wrong add-on type is fitted — DSQC1031 is the digital add-on and DSQC1033 is the relay add-on. Select by signal type and send us the number on the fitted module.
  • An IRC5 DSQC6xx I/O board is ordered in place of a scalable Local I/O add-on — the physical interface and configuration method differ. Check the controller platform before the order is placed.

Why Choose Us

  • Supplied against ABB article 3HAC058665-001 / DSQC1032, catalogued as "DSQC1032 Analog add on".
  • We confirm the controller platform, the DSQC1030 base device and the separate connector set 3HAC060925-001 with you before packing.
  • New original or used original — the condition is confirmed with you before you order.
  • Photos of the actual module, its nameplate and both connector positions provided on request.
  • Packed for export from Shanghai in anti-static protective packaging, and shipped worldwide.

Related Products

  • 3HAC060925-001 — the connector set for DSQC1032. A different part from this one, and not included with the module.
  • 3HAC058663-001 — DSQC1030 digital base device required by this add-on. A different part from this one.
  • 3HAC058664-001 — DSQC1031 digital add-on. A different part from this one.
  • 3HAC027652-001 — DSQC669 communication adapter for ABB controllers. A different part from this one.
  • ABB IRC5 Controller & Components — the rest of the ABB controller component range.

Request a quote for current pricing and lead time – send us the number on the module label (3HAC058665-001 or DSQC1032), the controller model and your I/O configuration, and we confirm the base device and connector set before you order.

Online Inquiry

If you have any suggestions, please contact us

Contact Us
IT'S SUPPORTED BY

Copyright © SongWei Robotics All Rights Reserved  -  Privacy Policy