All Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

All Small Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

ABB 3HAC032140-004 Lubricating Oil TMO 150

Product Condition New original or used original. Please confirm the condition with us before ordering.
Shipping Information Ships from Shanghai, China. Delivery lead time: 3-5 working days after order confirmation. Worldwide delivery by DHL / FedEx / UPS, with the sealed drum kept upright and protected.
Buyer Benefits
  • ABB part number 3HAC032140-004 — Lubricating oil TMO 150 by Kyodo Yushi for ABB robot gearboxes.
  • ABB lists this oil under IRB 260 and IRB 660; send the robot nameplate, serial and the axis you are servicing.
  • ABB warns that oil types must not be mixed; send a photo of the current oil label and we confirm the change procedure.
  • Request a quote – we confirm the drum label, robot fit and oil type before you order.
Item Location Ships from Shanghai, China.
Payment Information PayPal / T/T / Alibaba Trade Assurance.
  • Description
Can’t Find Your Part?

12,000+ parts in stock,Tested before shipping,Reply within 24 hours

Inquiry

ABB 3HAC032140-004 Lubricating Oil TMO 150

3HAC032140-004 is the ABB Lubricating oil TMO 150, the gearbox oil listed under this article number in the ABB data sheet and named as Kyodo Yushi TMO 150 in the ABB lubrication manual. ABB lists it under IRB 260 and IRB 660 in the Categories field and warns that oil types must not be mixed, so the robot nameplate, the axis and the label on the oil already in the gearbox are what decide the match. Send us the complete number from the drum label, the robot nameplate, the robot serial, the axis and a photo of the current oil label, and we confirm the lubricating oil before you order.

Specifications

Manufacturer ABB (original spare part)
Part Number 3HAC032140-004
Official Product Name Lubricating oil TMO 150, the ABB catalog, invoice and product name for this article
Lubricant Designation Kyodo Yushi TMO 150, as named in the ABB lubrication manual for gearboxes
Technical Information 1PC=20L, as stated in the ABB data sheet; send the drum label and we confirm the pack size
Robot Fit IRB 260 and IRB 660, as listed in the ABB Categories field; send the robot nameplate and we confirm the axis
Robotics Part Category Misc Parts - Lubrications/Chemicals, as listed in the ABB data sheet
Oil Compatibility ABB's lubrication manual warns that oil types must not be mixed and that the gearbox must be rinsed if the oil type is changed; send the current oil label and we confirm the procedure
Different Parts Wrist-axis grease and other gearbox oils carry separate ABB numbers
Fit Confirmation Send us the complete number from the drum label, the robot nameplate, the robot serial, the axis and a photo of the current oil label; we confirm the oil before you order.
Condition New original or used original. Please confirm the condition with us before ordering.

Send us the complete number from the drum label, the robot nameplate, the axis and a photo of the current oil label, and we confirm the lubricating oil before you order.

Industrial Applications

  • Scheduled gearbox oil changes on ABB robots where the maintenance manual specifies TMO 150.
  • Joint gearbox and reducer lubrication on IRB 260 and IRB 660 robots.
  • Preventive maintenance programs where the installed oil type is recorded before a refill.
  • Refurbishment of second hand cells where the gearbox oil is renewed as a documented service.
  • Fault finding after an oil change where the oil type has to be checked against the robot lubrication manual.

Design Purpose

This is the gearbox oil specified for ABB robot reduction gears, not a general-purpose industrial lubricant. ABB publishes one specified oil per gear position, and its lubrication manual warns that mixing oil types can damage the gearbox and that a change of oil type requires a thorough rinse. A different oil can affect the seals and the gear surfaces, which is why the drum label, the robot nameplate and the axis are part of the identity of this article. Send us the complete number from the drum label, the robot nameplate, the robot serial, the axis and a photo of the current oil label, and we confirm the oil and the change procedure before you order.

Common Failure Modes

  • Premature reducer wear or micro-pitting from the wrong oil or mixed oils.
  • Seal swelling, hardening or leakage caused by an incompatible lubricant.
  • Gearbox overheating under load from the wrong oil grade. For fault finding, see our article on how to identify a worn ABB robot gearbox before it fails.
  • Cold-start hesitation or poor lubrication at low temperature from the wrong grade.
  • Contamination from dirt, water or residual old oil left in the gearbox.
  • Under-fill or over-fill after a service where the oil level was not checked against the manual.
  • Reduced positioning accuracy and repeatability as lubrication degrades.

When an oil related fault appears, record the oil type shown on the drum and on the gearbox plug labels, check the oil level and look for leaks or contamination before draining. Send us the fault code, the complete number from the drum label, the robot nameplate, the robot serial, the axis and a photo of the current oil label, and we confirm the lubricating oil before you order. After the oil is exchanged, isolate and lock out all energy, confirm the oil type specified for that robot and axis in the ABB lubrication manual, drain the old oil completely, rinse the gearbox if the oil type is being changed, use clean dedicated dispensing equipment, refill to the level stated in the product manual, refit and seal the plugs, inspect for leakage, jog the robot at low speed and run one full cycle before returning to automatic production.

Why Choose Us

  • Supplied against ABB part number 3HAC032140-004, with the article number cross-checked against your drum label before packing.
  • We check the drum label, the robot nameplate, the serial, the axis and a photo of the current oil label before we quote.
  • New original or used original - the condition is confirmed with you before you order.
  • We distinguish this gearbox oil from wrist-axis grease and other ABB lubricants, which are separate consumables.
  • Ships from Shanghai via DHL / FedEx / UPS, with the sealed drum kept upright and protected, and the lead time confirmed in your quotation.

Related Products

Wrist-axis grease, other gearbox oils and other TMO 150 pack configurations are separate ABB articles. Send us the robot nameplate, the axis and the oil label from your last service and we identify which lubricant belongs to the job.

Request a quote for current pricing and lead time – send us the complete number from the drum label, the robot nameplate, the robot serial, the axis and a photo of the current oil label, and we confirm the lubricating oil before you order.

Online Inquiry

If you have any suggestions, please contact us

Contact Us
IT'S SUPPORTED BY

Copyright © SongWei Robotics All Rights Reserved  -  Privacy Policy