| Product Condition | New original or used original. Please confirm the condition with us before ordering. |
| Shipping | Ships from Shanghai, China. This unit contains a lithium battery (UN3091), so dangerous-goods transport restrictions apply — please contact our Shanghai office to arrange shipping and confirm the lead time. |
| Buyer Benefits |
|
| Item Location | Shanghai, China |
| Payment | We accept PayPal, T/T (bank transfer), and Alibaba Trade Assurance. |
12,000+ parts in stock,Tested before shipping,Reply within 24 hours
Inquiry| Part Number | 3HAC046277-001 |
| ABB Catalog Description | Serial measurement unit |
| Brand | ABB |
| Category | Serial measurement unit (SMB) — manipulator axis-position reference with battery backup |
| Definition | ABB 3HAC046277-001 is the serial measurement unit that holds the manipulator axis-position reference and calibration data, kept alive by battery while controller power is off. |
| Function | Stores the axis-position and calibration data of the manipulator and keeps it through power-down, so the controller knows the robot's position on restart instead of requiring a full recalibration. |
| Documented Assembly | We confirm the documented assembly for your unit before supply — send us the part number and the machine it came from. |
| Installation | Manipulator base / SMB compartment |
| Compatibility | We confirm the compatibility for your unit before supply — send us the part number and the machine it came from. |
| Previous Article Numbers | ABB lists the following as replaced by this article: 3HAC17396-1, 3HAB3365-1, 3HAC9522-1, 3HAB3700-1, 3HAC14504-1, 3HAC14505-1, 3HAB8413-1. Send any of these numbers and we confirm the match. |
| Dangerous Goods Status | Classified as dangerous goods — UN3091 (contains a lithium battery). Air-freight options are limited and the unit may ship separately from other items on the same order. Contact our Shanghai office to arrange shipping. |
| Net Weight | 0.68 kg |
| Gross Weight | 0.68 kg |
| Dimensions | 209 × 145 × 49 mm (net length × height × width) |
| Customs Tariff Number | 85176200 |
| Country of Origin | Sweden |
| WEEE Category | Product not in WEEE scope |
| Condition | New original or used original. Please confirm the condition with us before ordering. |
A robot controller needs to know where each axis actually is, not just where it was last commanded to go. The serial measurement unit stores that axis-position and calibration data at the manipulator and keeps it while the controller is powered down, using a battery to hold the information. When the controller restarts, it reads the stored position instead of having to be taught the robot's position again.
That dependency defines how this part behaves in service. The data is only as durable as the battery behind it, so a depleted cell does not just trigger a low-battery warning — it costs the robot its position reference, and the revolution counters have to be updated and the axis positions re-established before production can resume. For that reason 3HAC046277-001 is a matched spare: board revision, battery-contact type, robot serial number and the parts list all have to line up, and the replacement is followed by the revolution-counter procedure rather than being finished at the moment the unit is fitted.
Alarm codes for this unit are shown on the controller display. Send us the fault code and we confirm the diagnosis and the matching spare part.
If you have any suggestions, please contact us
Contact Us