ABB 3HNA018575-001 MCB-02 Motor Control Board for IRB 5500 Paint Robot

Product Condition	New original or used original. Please confirm the condition with us before ordering.
Shipping	Ships from Shanghai, China. Typical delivery lead time is 3-5 working days after order confirmation, via DHL / FedEx / UPS with secure protective packaging. Actual lead time depends on the specific condition and stock status confirmed with us.
Buyer Benefits	Genuine ABB 3HNA018575-001 (MCB-02) motor control board for the IRB 5500 paint robot, sourced through trusted supply channels. Axis-level drive control board designed for the IRC5 Paint (IRC5P) explosion-proof cabinet of ABB painting robots. Each unit is inspected before shipment to confirm basic integrity and physical condition. Quote together with your robot serial number and axis designation so we can confirm fitment before dispatch. Worldwide delivery from Shanghai with secure export packaging and full order tracking.
Item Location	Shanghai, China
Payment	We accept PayPal, T/T (bank transfer), and Alibaba Trade Assurance.

Inquiry Contact Us

Description

12,000+ parts in stock，Tested before shipping，Reply within 24 hours

+86-18616903058

[email protected]

Inquiry

Description

MCB-02 Motor Control Board for ABB IRB 5500 Paint Robot Cabinets

Specifications

Part Number	3HNA018575-001
Product Type	MCB-02 Motor Control Board (circuit board / PCB)
Function	Axis-level servo drive command and feedback acquisition for one axis of the IRB 5500 paint robot
Controller	ABB IRC5 Paint (IRC5P) explosion-proof cabinet (Ex d/e), axis-control slot
Compatible Robot	ABB IRB 5500 paint robot (FlexPainter series); confirm by robot serial number and axis designation
Communication	Cabinet-internal DriveBus / axis-control backplane (per IRB 5500 paint architecture)
Operating Environment	0 to +45 deg C inside paint cabinet (per cabinet PSU and cooling)
Net Weight	Send us your part number — we confirm the packing weight of this unit with your quote.
Dimensions	Send us your part number — we confirm the dimensions of this unit with your quote.
Country of Origin	Stated on the commercial invoice. Send us your part number and we confirm the origin for your shipment.
Frame / Part Type	Spare_Parts
Condition	New original or used original. Please confirm the condition with us before ordering.

Industrial Applications

IRB 5500 paint robots in automotive body-in-white and trim-and-final paint shops.
General-industry coating cells (appliances, agricultural equipment, commercial vehicles).
Aerospace surface-treatment spray applications requiring repeatable robot motion.
Tier-1 automotive supplier interior-trim and bumper painting lines.

Design Purpose

The MCB-02 motor control board is the axis-control-level drive board mounted inside the IRC5 Paint (IRC5P) explosion-proof cabinet of the ABB IRB 5500 paint robot. It issues servo drive commands and collects axis feedback for one robot axis, forming part of the axis-control chain under the IRC5 Paint architecture. As the IRB 5500 is an older generation (largely replaced by the IRB 5500-2 / IRB 5400 and the OmniCore paint platform), MCB-02 boards mainly circulate as surplus or refurbished units, so confirming fitment by robot serial number and axis designation before ordering is essential.

Safety & Handling Notes

Ex-area procedure: the board sits inside an explosion-proof (Ex d/e) paint cabinet. De-energize, lock out and follow Ex-area procedures before opening; only qualified personnel.
ESD protection: the board is ESD-sensitive. Use a grounded wrist strap, anti-static mat and anti-static packaging during handling and installation.
Confirm board type: 3HNA018575-001 is the MCB-02 axis motor control board — do not confuse it with 3HNA024855-001 (MCB-02B main control board), a different board in the same cabinet. Verify by label and serial before install.
Confirm fitment: match by robot serial number and axis designation; MCB boards are axis-specific and a wrong-axis board can fault the axis-control chain.
Condition first: confirm new or used original condition with us before ordering; used or refurbished boards should be functionally checked (power-on and axis self-loop) prior to install.
Qualified personnel: installation, commissioning and axis self-loop test must be performed by personnel familiar with the ABB IRC5 Paint cabinet and Ex-area safety.

Common Failure Modes

ESD damage or corrosion on board traces and components from improper handling.
Solder-joint fatigue from thermal cycling inside the cabinet.
Backplane or connector contact oxidation or looseness in the axis-control slot.
Component aging causing axis feedback or drive-command errors.
Wrong board variant installed (e.g., confusing MCB-02 with the MCB-02B main control board).
Moisture or solvent ingress if the cabinet Ex sealing is compromised.

Why Choose Us

Genuine ABB 3HNA018575-001 (MCB-02) sourced through trusted supply channels.
Each board is inspected before shipment; condition (new or used original) is confirmed with you before ordering.
We help confirm fitment by robot serial number and axis designation to avoid wrong-axis boards.
Secure anti-static export packaging with full order tracking from Shanghai.
Quote-based service — send your inquiry with robot SN and axis for a matched offer.

Online Inquiry

*Title

*Name

*E-mail

Tel

Company Name

*Content

All Categorys

All Small Categorys