All Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

All Small Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

FANUC A05B-2601-C412 E-Stop Power Control Unit 30 A

Product Condition New original or used original. Please confirm the condition with us before ordering.
Shipping Information Ships from Shanghai, China. Delivery lead time: 3-5 working days after order confirmation. Worldwide delivery by DHL / FedEx / UPS, with the terminal housings, lead ends and label protected so the assembly arrives ready to fit.
Buyer Benefits
  • FANUC part number A05B-2601-C412, the 30 A Emergency Stop Power Control Unit for R-30iB and R-30iB Plus controllers — a complete safety unit, not a CPU card.
  • The unit that gates three-phase power to the servo amplifiers on an emergency stop, supplied as one assembled metal-housing module.
  • Contains the E-stop board A20B-2200-0650, a 30 A no-fuse breaker NF50-SVFU and TeSys LC1 contactors, with red and blue heavy-current leads, yellow terminal housings and the FANUC label on the housing.
  • Check the full suffix before ordering: the -C4xx variants differ in rating, auxiliary contact configuration and controller safety pairing. A mechanically similar unit with the wrong suffix leaves a latched safety alarm.
  • Watch the neighbours: A05B-2601-C410 is another E-Stop Unit in this family; A05B-2601-C312 / C313 / C314 / C315 are cooling fan units. Each is a different part from this one.
  • Only one component failed? The board, breaker and contactors are separate parts inside this assembly — send a photo and the fault and we confirm what you need.
  • After any exchange, lock out and tag the main disconnect and verify zero potential before opening the cabinet, run the emergency stop and enabling device test afterwards, and repeat it at the annual safety inspection.
  • Supplied as new original or used original; we confirm the condition with you before you order.
  • Request a quote for current pricing and lead time – send the full number from the label on the installed unit, the controller type and a photo of the assembly, and we confirm the match before you order.
Item Location Ships from Shanghai, China.
Payment Information PayPal / T/T / Alibaba Trade Assurance.
  • Description
Can’t Find Your Part?

12,000+ parts in stock,Tested before shipping,Reply within 24 hours

Inquiry

FANUC A05B-2601-C412 E-Stop Power Control Unit 30 A

A05B-2601-C412 is the FANUC Emergency Stop Power Control Unit rated at 30 A for R-30iB and R-30iB Plus controllers. It is the safety unit that gates three-phase power to the servo amplifiers: the E-stop board, the 30 A no-fuse breaker and the contactors are built into one metal housing with their power leads and terminals. Service documentation calls this assembly the E-Stop Unit or Emergency Stop Unit, and the suffix on the part number decides the auxiliary contact configuration and the controller safety pairing. Send us the full number from the label on the unit you are replacing, the controller type and a photo of the assembly, and we confirm the match before you order.

Specifications

Part Number A05B-2601-C412
Product Name Emergency Stop Power Control Unit / E-Stop Unit (30 A)
Product Type Control cabinet safety unit that switches the three-phase supply to the servo amplifiers on an emergency stop, supplied as one assembled metal-housing unit
Controller FANUC R-30iB and R-30iB Plus. Confirm the controller type from the cabinet nameplate when you inquire.
Rated Current 30 A. The -C4xx units in this family carry different current ratings, so the suffix is checked against the installed unit before an order is placed.
Included Components E-stop board A20B-2200-0650, a 30 A no-fuse breaker NF50-SVFU, and TeSys LC1 control contactors, assembled in a metal housing. These are components of this unit and are ordered separately when only one of them has failed.
Construction Galvanised steel frame and cover with a FANUC CORPORATION label, red and blue heavy-current lead sets with white identification sleeves, yellow terminal housings, a black terminal block and heat sink, and the grey breaker and contactor modules mounted inside the frame.
Nameplate Reference The yellow FANUC label on the housing carries the unit number. Check that full number before ordering: the suffix sets the auxiliary contact configuration and the controller safety pairing, and a mechanically similar unit with a different suffix leaves a latched safety alarm even with healthy contactors.
Series Difference A05B-2601-C410 is another E-Stop Unit in the -C4xx family with a different rating and configuration. The A05B-2601-C312 / C313 / C314 / C315 numbers are cooling fan units for the same controller generation. Each is a different part from this one.
Condition New original or used original. Please confirm the condition with us before ordering.

The suffix on this number is a safety setting, not just a revision. A unit that looks the same but carries a different -C4xx suffix can leave the controller with a latched safety alarm even when the contactors are healthy. Send us a photo of the label on the installed unit and the controller type, and we confirm the exact variant before we quote.

Industrial Applications

  • Replacing a failed E-Stop Unit in a FANUC R-30iB or R-30iB Plus control cabinet on welding, handling, assembly and machine-tending robots.
  • Restoring the emergency stop and motor control contactor chain after a welded contact, a blown fuse on the E-stop board or a coil driver fault.
  • Refurbishing a used R-30iB cabinet where the original safety unit is missing or has been exchanged for the wrong suffix.
  • Bringing a cell back into service after a safety-chain fault that prevents the controller from accepting motion commands.
  • Service stock for maintenance teams running several R-30iB cells from one spares inventory.

Design Purpose

  • One assembled unit that combines the E-stop board, the 30 A breaker and the contactors, so the safety chain is exchanged as a matched set rather than rebuilt from separate parts.
  • A metal housing with DIN-rail style mounting, sized to sit in the controller cabinet alongside the servo amplifiers it protects.
  • Heavy red and blue power leads, yellow terminal housings and a labelled harness, so each circuit returns to its original terminal after an exchange.
  • A part-number suffix tied to the auxiliary contact configuration and controller safety pairing, which keeps the hardware matched to the safety logic of the controller.
  • A defined FANUC article number with its own label on the housing, so the installed unit can be identified from a photograph before a spare is ordered.

Common Failure Modes

  • The controller holds a latched safety or motor-control-contactor alarm after a stop — check the auxiliary contacts on the contactors and the fuses on the E-stop board before ordering a new unit, then power-cycle the controller to clear the latched state.
  • A replacement unit is fitted and the safety alarm stays on — compare the full suffix on the new label with the old one, because a different -C4xx suffix changes the auxiliary contact configuration and the safety pairing.
  • The controller will not enable servo power — with the main disconnect locked out and tagged, verify zero potential at the line side with a known-good tester, then check the contactor coil terminals and the harness back to the E-stop board.
  • Intermittent emergency stop trips — inspect the terminal screws for oxidation and the harness for a loose crimp or a pinched wire in the cabinet track.
  • Only one component has failed — the A20B-2200-0650 board, the NF50-SVFU breaker and the LC1 contactors are separate parts inside this assembly. Send us a photo of the unit and the fault and we confirm which part you need before you order.
  • After any exchange, run the emergency stop and enabling device function test, repeat it at the annual safety inspection, and keep the X11 connections unplugged until the cabinet is powered down.

Why Choose Us

  • Supplied against the FANUC number A05B-2601-C412, the 30 A E-Stop Power Control Unit for R-30iB and R-30iB Plus cabinets.
  • We match the order against the full number on the label of the installed unit, the cabinet nameplate and photos of the assembly, before packing.
  • New original or used original — the condition is confirmed with you before you order.
  • Photos of the actual unit, including the FANUC label, terminal housings, contactors and lead sleeves, provided on request.
  • Packed for export from Shanghai with the terminal housings and lead ends protected, and shipped worldwide.

Related Products

  • A05B-2601-C410 — another E-Stop Unit in the -C4xx family with a different rating and configuration. A different part from this one; check the installed label before ordering.
  • A05B-2601-C312 / C313 / C314 / C315 — cooling fan units for the R-30iB controller generation. Different parts from this one.
  • A20B-2200-0650, NF50-SVFU, TeSys LC1 contactors — components inside this assembly, ordered separately when only one has failed.
  • FANUC Controller Accessories — the rest of the R-30iB controller parts range.
  • FANUC Robot Parts — the wider FANUC robot spare parts range.

Request a quote for current pricing and lead time – send us the full number from the label on the installed unit, the controller type and a photo of the assembly, and we confirm the match before you order.

Online Inquiry

If you have any suggestions, please contact us

Contact Us
IT'S SUPPORTED BY

Copyright © SongWei Robotics All Rights Reserved  -  Privacy Policy