All Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

All Small Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

FANUC A05B-2601-C313 Cooling Fan Unit for R-30iB / R-30iB Plus

Product Condition New original or used original. Please confirm the condition with us before ordering.
Shipping Information Ships from Shanghai, China. Delivery lead time: 3-5 working days after order confirmation. Worldwide delivery by DHL / FedEx / UPS, with the fan and the steel duct packed so the assembly arrives with a straight duct and an undamaged connector.
Buyer Benefits
  • Genuine FANUC part number A05B-2601-C313, the cooling fan unit for the robot controller cabinet.
  • It is the part that moves air through the controller cabinet, so it is the item that decides whether the controller and its drives stay inside their temperature range during continuous production.
  • Fitted for the FANUC R-30iB and R-30iB Plus controllers in the "A" style cabinet, mounted on the inside of the cabinet door.
  • Supplied as one assembly: the galvanised steel cooling duct with the axial fan motor and its 12-pin connector already fitted, so the cabinet door part is exchanged without separate wiring work on site.
  • Published size 17 3/4 inch, mild steel body in silver, panel mounting.
  • The fan motor is a separate article number, A05B-2601-C314, so a motor-only failure does not mean the whole cooling unit has to be replaced.
  • Watch the series: A05B-2601-C312 is the double ventilator, A05B-2601-C315 is the fan on the outside of the door. Same series, different article numbers, different mounting positions.
  • Supplied as new original or used original; we confirm the condition with you before you order.
  • Request a quote for current pricing and lead time – send the article number on the label of the unit you are replacing and the controller type on the cabinet nameplate, and we confirm the match before you order.
Item Location Ships from Shanghai, China.
Payment Information PayPal / T/T / Alibaba Trade Assurance.
  • Description
Can’t Find Your Part?

12,000+ parts in stock,Tested before shipping,Reply within 24 hours

Inquiry

FANUC A05B-2601-C313 Cooling Fan Unit for R-30iB / R-30iB Plus Controllers

A05B-2601-C313 is the FANUC cooling fan unit for the robot controller cabinet: a galvanised steel cooling duct with the axial fan motor and its connector already fitted, and the supplier product entry lists the fan motor as a component of the unit under article number A05B-2601-C314. It is the part that moves the air through the cabinet door of the FANUC R-30iB and R-30iB Plus controllers in the "A" style cabinet, mounted on the inside of that door. The A05B-2601 series contains several cabinet cooling parts that are easy to confuse with one another — a fan motor on its own, a fan on the outside of the door, and a double ventilator — and each has its own article number, so send us the article number on the label of the unit you are replacing and the controller type on the cabinet nameplate, and we confirm the match before you order.

Specifications

Part Number A05B-2601-C313
Product Name Cooling fan unit, exchanger type. The catalogue product name for this article number is COOLING FAN UNIT, product series A05B-2601.
Product Type Controller cabinet cooling fan unit, supplied as an assembly with the fan motor and connector fitted
Where Used FANUC R-30iB and R-30iB Plus robot controllers, "A" style cabinet. Mounted inside the door of the controller cabinet. The same article number is also indexed under the RJ3 / RJ3iB controller range, so quote the article number rather than the range name.
Fan Motor The unit is supplied with the fan motor fitted. The fan motor carries its own article number, A05B-2601-C314, and is available separately if only the motor is being replaced.
Published Size 17 3/4 inch, as published for this article number
Connector 12-pin connector on the fan motor lead
Material and Finish Mild steel, silver
Mounting Control panel mounting, inside the controller cabinet door
Category FANUC sensors and cooling fans
Condition New original or used original. Please confirm the condition with us before ordering.

Send us the article number on the label of the unit you are replacing and the controller type from the cabinet nameplate, and we confirm the match before we quote.

Industrial Applications

  • FANUC R-30iB and R-30iB Plus robot controller cabinets in the "A" style, where the cooling fan unit is mounted on the inside of the cabinet door.
  • Replacement of a failed or noisy cabinet fan unit on a controller that reports an over-temperature condition or shuts the amplifier down under load.
  • Restoration of a cell where the cabinet air path has been blocked and the cooling performance has dropped, even though the fan still turns.
  • Service stock for maintenance teams running R-30iB and R-30iB Plus controller cabinets, where a spare fan unit and a spare fan motor are kept for the same cabinet type.
  • Use on older RJ3 / RJ3iB controller cabinets of the same cabinet type, quoted against the article number on the unit being replaced.

Design Purpose

  • Moves air through the controller cabinet so the controller and its drives stay inside their operating temperature range under continuous production duty.
  • Supplied as one assembly, the steel cooling duct with the fan motor and connector already fitted, so the cabinet door part is exchanged without any separate wiring work on site.
  • The fan motor is a separately identified article number, so a motor-only failure does not force the whole cooling unit to be replaced.
  • Mounted on the inside of the cabinet door, where the duct draws and discharges air across the cabinet section that carries the heat.
  • Built for the controller cabinet environment, with a steel duct body and a panel mounting arrangement rather than a free-standing axial fan.

Common Failure Modes

  • The controller reports an over-temperature condition or the amplifier trips under load while the fan is turning — a fan that rotates but no longer moves air points at the duct, the connector or the fan motor bearings rather than at the controller.
  • Rattling or scraping noise from the cabinet door — the fan motor bearings are worn, and the motor is a separate article number from the unit, so it can be exchanged on its own.
  • The unit does not start after a cabinet service or a door swap — check that the 12-pin connector is fully seated and that the lead is not pinched between the door and the cabinet frame.
  • The wrong member of the A05B-2601 series fitted — the fan motor alone, the fan on the outside of the door and the double ventilator are different article numbers with different mounting positions, and a unit from the wrong position does not mount or does not cool the right side of the door.
  • Airflow partly restored but cabinet temperature still rising — a blocked or bent steel duct reduces the cooling path even with a healthy fan motor, so the duct is checked as well as the motor.

Why Choose Us

  • Genuine FANUC part, supplied against article number A05B-2601-C313.
  • We match the order against the article number on the label of the unit you are replacing and the controller type on the cabinet nameplate, before dispatch.
  • New original or used original — the condition is confirmed with you before you order.
  • Photos of the actual unit, including the label and the connector, provided on request.
  • Packed for export from Shanghai with the fan and the duct protected so the assembly arrives without a bent duct or a damaged connector.

Related Products

  • A05B-2601-C314 — FANUC fan motor, the motor that is fitted in this unit. A different part from this one: it is the motor on its own, without the steel cooling duct, and it is the article to quote when only the motor has failed.
  • A05B-2601-C315 — FANUC door fan unit, mounted on the outside of the controller cabinet door. A different part from this one, with a different mounting position.
  • A05B-2601-C312 — FANUC double ventilator unit for the RJ3iC / R-30iA / R-30iB controller range. A different part from this one: it carries two fans rather than one.
  • FANUC Sensors & Cooling Fans — the rest of the FANUC cooling and sensing range.
  • FANUC Controller Accessories — the cabinet-side parts for FANUC controllers.
  • FANUC Robot Parts — the full FANUC spare parts range.

Request a quote for current pricing and lead time – send us the article number on the label of the unit you are replacing and the controller type on the cabinet nameplate, and we confirm the match before you order.

Online Inquiry

If you have any suggestions, please contact us

Contact Us
IT'S SUPPORTED BY

Copyright © SongWei Robotics All Rights Reserved  -  Privacy Policy