FANUC A660-2006-T840 iPendant Teach Pendant Cable for R-30iA
A660-2006-T840 is the FANUC iPendant teach pendant cable that links the teach pendant to the robot controller on R-30iA and R-30iB systems. It is the base number of a cable family: the full ordering number carries a #L suffix that fixes the cable length and whether the cable is built for the A-cabinet or the B-cabinet controller, so two cables sharing this base number can be different parts. Send us the complete number from the tag on your cable, the cabinet type and the length you need, together with a photo of both connectors, and we confirm the match before you order.
Specifications
| Part Number |
A660-2006-T840 (base number). Full ordering numbers carry a #L suffix, for example A660-2006-T840#L11R03B. |
| Product Name |
iPendant cable / teach pendant cable, FANUC A660 cable family |
| Product Type |
Cable assembly connecting the FANUC iPendant teach pendant to the robot controller, carrying the pendant power and signal lines |
| Controller Family |
FANUC R-30iA and R-30iB controllers, in A-cabinet and B-cabinet versions. Confirm the controller type from the cabinet nameplate when you inquire. |
| Ordering Suffix |
The #L suffix fixes the cable length and the cabinet version. Published examples: #L11R03B for a 10 m A-cabinet cable, #L22R03C for a 20 m B-cabinet cable, and #L12R03C for the B-cabinet version. |
| Connectors |
A round metal multi-pin plug with a locking ring and a moulded strain relief at one end, and a moulded rectangular connector housing with a short pigtail at the other. Send a photo of both ends and we confirm the connector version before you order. |
| Cable Construction |
Black shielded cable supplied in a coil, with a small identification sleeve on the jacket, built for the movement and electrical noise of a robot cell. |
| Length |
Set by the #L suffix on the full part number. Send us the number from the cable tag or the reach you need, and we confirm the length before we quote. |
| Series Variants |
A660-2006-T840#L11R03B, #L12R03C and #L22R03C are this same base cable in different length and cabinet versions. A660-2006-T914#L11R03A is the iPendant cable for MATE controllers and A660-2006-T846 is the integrated A-cabinet variant; both are a different part from this one. |
| Condition |
New original or used original. Please confirm the condition with us before ordering. |
The #L suffix is what keeps a replacement from turning into a second order: a 10 m A-cabinet cable and a 20 m B-cabinet cable share the A660-2006-T840 base number but do not interchange. Send us the full number from the tag on the old cable, or the controller nameplate and the reach you need, and we match the length and connector version before we quote.
Industrial Applications
- Replacing a worn or damaged iPendant cable on FANUC R-30iA and R-30iB robots in automotive, electronics and general manufacturing cells.
- Restoring teach pendant communication when the pendant blanks out or drops its enable signal as the cable is moved during teaching.
- Extending operator reach to the cabinet by ordering a longer length version from the same cable family.
- Commissioning a used robot, a controller retrofit or a relocated cell where the original pendant cable is missing or has the wrong cabinet version.
- Service stock for maintenance teams and integrators running several FANUC cells from one spares inventory.
Design Purpose
- A shielded flexible assembly that carries the pendant power and signal lines between the iPendant and the controller, so the pendant stays live through a full production shift.
- A round locking multi-pin plug and a moulded connector housing keep both ends seated under the vibration and cable movement of a working cell.
- Length and cabinet version are set by the #L suffix, so one base number covers several installation layouts without changing the connector style at the pendant.
- Supplied coiled with strain reliefs and a jacket identification sleeve, ready to run from the pendant to the operator panel connection on the cabinet.
- A replaceable cable assembly: a cable fault is repaired by changing the cable, not by exchanging the teach pendant or the controller panel.
Common Failure Modes
- The pendant goes blank or drops out when the cable is moved — run a hand along the jacket to find a hard spot or a break, then watch for the dropout again at that point. A conductor broken inside the jacket calls for a cable replacement rather than a pendant replacement.
- Deadman or enable faults appear with no pendant fault shown — inspect both connector faces and the shield termination at the connector shell before ordering a new pendant.
- Intermittent communication on a cell with servo drives — check that the cable is routed away from motor power lines and that the shield is bonded at the connector, because EMI shows up as a pendant that resets at random.
- The locking ring no longer holds or the strain relief has split — replace the cable assembly as a unit so the plug seats firmly and stays seated.
- The wrong version is on the order — cables with the same base number but a different #L suffix can be too short or built for the other cabinet type. Confirm the full number from the tag and the cabinet type before the order is placed.
- A MATE-controller or integrated-cabinet iPendant cable is ordered in place of this one — A660-2006-T914 and A660-2006-T846 are different parts. Check the controller type on the nameplate before the order is placed.
Why Choose Us
- Supplied against the FANUC base number A660-2006-T840, with the length and cabinet version matched to the #L suffix on your cable.
- We check the full number from the cable tag, the controller cabinet type and photos of both connectors before packing.
- New original or used original — the condition is confirmed with you before you order.
- Photos of the actual cable, both connectors and the identification sleeve provided on request.
- Packed for export from Shanghai, coiled with the connectors and strain reliefs protected so the assembly arrives ready to fit.
Related Products
-
A660-2006-T840#L11R03B / #L12R03C / #L22R03C — the same base cable in the 10 m A-cabinet, B-cabinet and 20 m B-cabinet versions. Send the full number and we supply the version that fits your cell.
-
A660-2006-T914#L11R03A — FANUC iPendant teach pendant cable for MATE controllers, 10 m. A different part from this one.
-
A660-2006-T846 — FANUC iPendant cable for the integrated A-cabinet controller. A different part from this one.
-
A05B-2518-C100 — FANUC iPendant teach pendant, the unit this cable connects to. A different part from this one.
-
A05B-2518-C101 — FANUC iPendant teach pendant with a different keypad mask. A different part from this one.
-
FANUC Teach Pendants & Pendant Boards — the pendant range for R-30iA and R-30iB controllers.
-
FANUC Robot Cables — the rest of the FANUC cable and dress-package range.
Request a quote for current pricing and lead time – send us the complete number from the cable tag (including the #L suffix), the controller cabinet type and the length you need, and we confirm the match before you order.