ENEN

All Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

All Small Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts
ABB 3HAC047397-001 DeviceNet I/O Harness for ABB Robots
ABB 3HAC047397-001 DeviceNet I/O Harness for ABB Robots
ABB 3HAC047397-001 DeviceNet I/O Harness for ABB Robots
ABB 3HAC047397-001 DeviceNet I/O Harness for ABB Robots
ABB 3HAC047397-001 DeviceNet I/O Harness for ABB Robots
ABB 3HAC047397-001 DeviceNet I/O Harness for ABB Robots
ABB 3HAC047397-001 DeviceNet I/O Harness for ABB Robots
ABB 3HAC047397-001 DeviceNet I/O Harness for ABB Robots

ABB 3HAC047397-001 DeviceNet I/O Harness for ABB Robots

Product Condition New original or used original. Please confirm the condition with us before ordering.
Shipping Ships from Shanghai, China. Typical delivery lead time 3-5 working days after order confirmation. Secure cable packaging for safe international delivery via DHL / FedEx / UPS.
Buyer Benefits Genuine ABB spare part 3HAC047397-001, DeviceNet I/O harness (catalog name: HARN DEVICENET I/O 1-2 SC).
For ABB robot DeviceNet I/O connections; confirm your robot model and controller configuration with us before ordering.
Product net weight 0.31 kg; length 1492.5 mm, width 61.6 mm, height 15 mm (per ABB distributor catalog data).
Quote-based sourcing with condition confirmed before order.
Item Location Shanghai, China. Stock also held at ABB Menden, Germany.
Payment PayPal / T/T / Alibaba Trade Assurance.
Inquiry Contact Us
  • Description
Can’t Find Your Part?

12,000+ parts in stock，Tested before shipping，Reply within 24 hours

+86-18616903058
[email protected]
Inquiry

DeviceNet I/O Harness for ABB Robot Controllers

Specifications

Part Number 3HAC047397-001
Product Type DeviceNet I/O harness (catalog name: HARN DEVICENET I/O 1-2 SC).
Function DeviceNet I/O connection cable for ABB robot controllers and I/O devices.
Compatible Equipment ABB robots / controllers using DeviceNet I/O. Confirm by robot model and controller configuration — no specific model is documented publicly.
Product Net Weight 0.31 kg (per ABB distributor catalog data; no official direct evidence).
Dimensions 1492.5 mm (length) × 61.6 mm (width) × 15 mm (height) (per ABB distributor catalog data).
Customs Tariff 85444290 (per ABB distributor catalog data; HS chapter 8544 confirms a cable/harness article).
Part Type New.
Frame Size Spare_Parts.
Country of Origin Not confirmed.
Product Condition New original or used original. Please confirm the condition with us before ordering.

Industrial Applications

This DeviceNet I/O harness is used to wire DeviceNet I/O devices into ABB robot controller systems, carrying communication and I/O signals between the controller and field devices such as I/O modules, valves, sensors and grippers. It is a spare harness for maintaining or repairing existing ABB robot cells that use DeviceNet as the fieldbus for distributed I/O.

Design Purpose

The harness provides the physical DeviceNet I/O cabling (HARN DEVICENET I/O 1-2 SC) needed to connect and extend DeviceNet nodes on an ABB robot controller. Its role is to deliver reliable DeviceNet communication and I/O wiring so the robot cell can interface with peripheral automation equipment without custom cable fabrication.

Safety and Handling Notes
  • Confirm fitment: the specific robot model and controller generation for this harness are not documented publicly; verify against your cable label or robot nameplate, and confirm with us before ordering.
  • Route away from power: keep DeviceNet cabling separated from motor power and high-current lines to avoid electromagnetic interference; use routed trays or shielded paths where needed.
  • Inspect connectors: before fitting, check plugs/sockets for damaged pins, bending, contamination or worn latches; ensure the connector seats and locks fully.
  • Mind bend radius and length: the harness is 1492.5 mm long; plan routing so it does not rub against moving parts or exceed the permitted bend radius.
  • Test after fitting: after connection, run a DeviceNet communication / node identification check to confirm I/O signals are present and stable.
  • Confirm condition first: available as new original or used original; confirm the condition with us before ordering.

Common Failure Modes

  • Loose connector or oxidized pins causing DeviceNet communication loss or dropped nodes.
  • Electromagnetic interference from running alongside power cables, making communication unstable.
  • Cable bending or abrasion (especially at moving joints) leading to internal wire breaks.
  • Contamination by oil or coolant at the connector causing poor contact.
  • Wrong length or connector type selected, so the harness cannot be installed.
  • Misconnection to a non-DeviceNet port, damaging the link or device.

Why Choose Us

We supply part 3HAC047397-001 and verify the applicable robot model and controller configuration with you before dispatch to help prevent misorders. New or used original condition is available, with quote-based pricing per part number. We confirm the catalog physical data (0.31 kg; 1492.5 × 61.6 × 15 mm) and ship worldwide via DHL / FedEx / UPS in secure cable packaging. Send your inquiry for pricing and lead time.

Related Products

  • 3HAC058664-001 — DSQC1031 Digital I/O unit for ABB OmniCore (different part; peer I/O module in the controller I/O family).
  • 3HAC058665-001 — DSQC1032 Analog I/O unit for ABB OmniCore (different part; peer I/O module in the controller I/O family).

Note: this is a DeviceNet I/O harness; the exact I/O module and robot model it serves should be confirmed from your cable label or controller configuration.

Online Inquiry

If you have any suggestions, please contact us

Contact Us
IT'S SUPPORTED BY

Copyright © SongWei Robotics All Rights Reserved  -  Privacy Policy