KUKA 00-198-269 KSP 600-3x64 Servo Pack for KRC4

KUKA 00-198-269 — KSP 600-3x64 Servo Pack for KRC4 Controllers

The KUKA 00-198-269 is a KSP 600-3x64 servo pack (KUKA part of the KRC4 drive stack). It is the 3-axis drive amplifier that draws from the KRC4 DC link and delivers three matched 64 A AC axis outputs, driving up to three high-current robot or positioner axes from one module.

Specifications

Industrial Applications

• Drives high-current robot and positioner axes on KUKA KRC4 welding, handling, palletizing and general automation cells (e.g. larger KR class axes).
• Replaces a faulty KSP in the KRC4 drive cabinet to bring a downed high-current axis back online.
• Used in multi-axis systems where one KSP 600-3x64 covers up to three heavy axes from the DC link.
• Suitable for production lines that must restore a single failed drive without replacing the whole control cabinet.

Design Purpose

The KSP 600-3x64 is the power stage of a KUKA KRC4 axis drive. It takes the DC link voltage from the controller cabinet and converts it into three matched AC axis outputs, each rated 64 A, to run larger or heavier robot and positioner motors. When one KSP fails, only the affected axes lose power — swapping the failed module on the same controller generation restores the cell without touching the robot arm or the rest of the drive stack. The 3x64 rating (three 64 A axes) sits at the top of the KSP 600 family above the 3x40 and 3x20 packs, so the correct current rating must match the driven axes.

Common Failure Modes

• Overcurrent or short-circuit trip on one or more axes, stopping the robot with a drive fault.
• DC-link fault, where the KSP cannot hold the link voltage and the controller reports a DC-link error.
• Output-stage damage from motor or cable faults, leaving a high-current axis without drive power.
• Overheating or internal component failure after years of service in a warm cabinet.
• Communication loss with the controller, preventing axis enable and motion.
• Verify by part number 00-198-269 and the controller type — send us your KRC4 controller label or drive-stack photo and we confirm the correct KSP rating before you order.

Why Choose Us

• Original KUKA 00-198-269 KSP 600-3x64 servo pack, verified by part number.
• Axis rating and DC-link values confirmed against your KRC4 controller before quotation.
• Supplied new or used original; condition confirmed before ordering.
• DC-link input and axis output checked before packing.
• Request a quote with your part number and controller type — we confirm the match before you order.

Related Products

• KUKA 00-198-268 — KSP 600-3x40 servo pack, the mid-current sibling (17 A per axis) in the same KRC4 drive family.
• KUKA 00-198-266 — KSP 600-3x20 servo pack, the lower-current sibling for smaller axes.
• KUKA 00-246-872 — KRC4 RDC card (resolver digital converter) that works with the axis drives.
• KUKA 00-235-627 — KRC4 CCU cabinet control unit, the controller core the KSP mounts in.
• KUKA 00-174-774 — KRC4 motor encoder cable linking the servo pack to the robot axis motors.