All Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

All Small Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

YASKAWA HW0388707-B U-Axis Speed Reducer for MH5L Robots

Product Condition New original or used original. Please confirm the condition with us before ordering.
Shipping Information Ships from Shanghai, China. Delivery lead time: 3-5 working days after order confirmation. Worldwide delivery by DHL / FedEx / UPS, with the machined flange face and the input gears protected so the reducer arrives ready to fit.
Buyer Benefits
  • YASKAWA article number HW0388707-B, catalogued by Yaskawa Motoman as "REDUCER, SPEED, U-AXIS, MH5L, DX ROBOT" — the U-axis speed reducer in the L-, U-Axes Unit of the MH5L robot.
  • Two numbers, one part: 157267-2 is the Yaskawa Motoman spare-parts number for this same reducer, so an older parts list still finds the right unit.
  • Fits the MH5L family: MH5LS, MH5LS II and MH5LF on DX100, DX200 and FS100 controllers, per the official applicable-models list.
  • Watch the suffix: Table 6-3 of the Yaskawa MH5 maintenance manual lists HW0388707-A for MH5S / MH5F and HW0388707-B for MH5LS / MH5LF. The two are not interchangeable.
  • Yaskawa Motoman publishes a packaged weight of 1.88 lb for this article; section 6.3 of the MH5 maintenance manual gives the U-axis disassembly and reassembly procedure.
  • After the reducer is exchanged, run the Yaskawa home position calibration: lock out and tag out the controller, follow the manual for the timing belts, housing seal, tightening torques and oil seals, refit the harness and cover, then calibrate and verify the U-axis position. Send us the controller manufacturing number and we confirm the procedure for your system.
  • Supplied as new original or used original; we confirm the condition with you before you order.
  • Request a quote for current pricing and lead time – send the number on your U-axis unit nameplate (HW0388707-B or 157267-2), the robot model and controller type, and a photo of the fitted reducer, and we confirm the match before you order.
Item Location Ships from Shanghai, China.
Payment Information PayPal / T/T / Alibaba Trade Assurance.
  • Description
Can’t Find Your Part?

12,000+ parts in stock,Tested before shipping,Reply within 24 hours

Inquiry

YASKAWA HW0388707-B U-Axis Speed Reducer for MH5L Robots

HW0388707-B is the YASKAWA U-axis speed reducer for the MH5L robot family. Yaskawa Motoman lists it as "REDUCER, SPEED, U-AXIS, MH5L, DX ROBOT" under Motoman part number 157267-2, and the MH5 maintenance manual places it in the L-, U-Axes Unit. The same manual lists HW0388707-A for the MH5S / MH5F and HW0388707-B for the MH5LS / MH5LF, so the final letter decides which robot the reducer fits. Send us the number on your U-axis unit, the robot model and controller type, or a photo of the fitted reducer, and we confirm the match before you order.

Specifications

Part Number HW0388707-B
Motoman Part Number 157267-2, the Yaskawa Motoman spare-parts number for this same reducer. Both numbers are kept on this page so an older parts list still finds the right unit.
Product Name REDUCER, SPEED, U-AXIS, MH5L, DX ROBOT (Yaskawa Motoman spare parts catalogue)
Product Type U-axis speed reducer for the L-, U-Axes Unit of the MH5 robot; a wrist/arm joint gear unit, not a servo motor or a controller board
Robot Family Yaskawa Motoman MH5L family: MH5LS, MH5LS II and MH5LF, on DX100, DX200 and FS100 controllers. The official applicable-models list also covers YR-MH005LS-A00 / A01 / B00, YR-MH005LS-J00 / J01 / K00 and YR-MH005LF-A00 / A01.
Suffix Distinction HW0388707-A is the U-axis speed reducer for MH5S / MH5F; HW0388707-B is the U-axis speed reducer for MH5LS / MH5LF, as listed in Table 6-3 of the Yaskawa MH5 maintenance manual. A different part from this one, and the two are not interchangeable.
Construction The product photo shows a compact round machined metal reducer with a flange bolt circle, exposed input pinions and a ball-bearing race on the input side. No article number is legible in the photo; send us a photo of the label on your fitted unit and we confirm the version.
Yaskawa Published Data Yaskawa Motoman lists this article as part 157267-2 with a packaged weight of 1.88 lb and the applicable MH5L models above. The version, packing and paperwork for the reducer in your quotation are confirmed with you before the order is placed.
Installation Reference Section 6.3 of the Yaskawa MH5 maintenance manual covers disassembly and reassembly of the U-axis speed reducer, including the L- and U-axis timing belts, the housing seal, the specified tightening torques and the oil seals. Follow that chapter for the exchange.
Condition New original or used original. Please confirm the condition with us before ordering.

Two numbers cause most of the mix-ups here: 157267-2 and HW0388707-B are the same reducer, while HW0388707-A is the U-axis reducer for a different MH5 variant. Send us the number on your U-axis unit, the robot model and controller type, and a photo of the fitted reducer, and we confirm the suffix before we quote.

Industrial Applications

  • Replacing a worn or noisy U-axis speed reducer on Yaskawa Motoman MH5L, MH5LS, MH5LS II and MH5LF robots in assembly, handling and small-part machining cells.
  • Restoring U-axis motion and positioning accuracy after backlash, a worn input gear or a seal leak at the wrist/arm joint.
  • Rebuilding a used MH5L robot or a refurbished L-, U-Axes Unit where the original reducer is missing.
  • Service stock for maintenance teams and integrators running DX100, DX200 and FS100 cells with MH5L-family robots from one spares inventory.
  • Correcting a spares list that still calls out HW0388707-A when the robot in the cell is an MH5LS or MH5LF.

Design Purpose

  • A joint gear unit that reduces the servo motor speed and raises torque at the U-axis, so the arm holds position under load without oversizing the motor.
  • A compact round housing with a machined flange and bolt circle that bolts into the L-, U-Axes Unit without modifying the arm casting.
  • Exposed input pinions and a bearing race on the input side, driven through the L- and U-axis timing belts as described in the MH5 maintenance manual.
  • A published Yaskawa Motoman article number with a defined -A / -B variant split, which keeps the parts list and the robot build record aligned.
  • A 1.88 lb packaged unit that one engineer can handle during a planned exchange, with the reducer coming out as a single assembly.

Common Failure Modes

  • After the reducer is exchanged, run the Yaskawa home position calibration — lock out and tag out the controller, follow section 6.3 of the MH5 maintenance manual for the timing belts, housing seal, specified tightening torques and oil seals, refit the internal wiring harness and cover, power up, then carry out the home position calibration and verify the U-axis position before returning to production. Send us the controller manufacturing number and we confirm the calibration procedure for your system.
  • Backlash, positioning drift or a clicking noise at the U-axis — with the power off, check the reducer mounting bolts, the timing belt tension and the oil seal before ordering a servo motor.
  • Grease leakage or a dry bearing race at the wrist — inspect the seal faces and apply the lubricant specified in the MH5 maintenance manual during reassembly.
  • HW0388707-A is ordered for an MH5LS or MH5LF — that suffix belongs to the MH5S / MH5F. Check the suffix on the fitted unit before the order is placed.
  • 157267-2 is treated as a second, different part — it is the Yaskawa Motoman number for this same reducer. Send us either number and we confirm the match.
  • A R-, B- or T-axis reducer is ordered in place of the U-axis unit — check the axis position given on your parts list, and send us a photo of the unit nameplate so we can identify it.

Why Choose Us

  • Supplied against YASKAWA HW0388707-B / Motoman 157267-2, catalogued as REDUCER, SPEED, U-AXIS, MH5L, DX ROBOT.
  • We match the order against the number on your U-axis unit, the robot model and controller type (DX100 / DX200 / FS100), and the -A / -B suffix, before packing.
  • New original or used original — the condition is confirmed with you before you order.
  • Photos of the actual reducer, its flange bolt circle and the input gears provided on request.
  • Packed for export from Shanghai with the machined flange and gear faces protected, and shipped worldwide.

Related Products

  • HW0388707-A — the U-axis speed reducer for Yaskawa MH5S / MH5F robots. A different part from this one, and not interchangeable with the -B version.
  • HW1483880 — YASKAWA R/B/T-axis speed reducer. A different part from this one.
  • L-, R-, B- and T-axis speed reducers for the MH5 family — other joint gear units used on the same robot series. Contact us for the full list of compatible reducers.
  • Yaskawa Reducers & Grease — the rest of the Yaskawa reducer and lubricant range.
  • Yaskawa Robot Parts — all Yaskawa robot spare parts.

Request a quote for current pricing and lead time – send us the number on your U-axis unit nameplate (HW0388707-B or 157267-2), the robot model and controller type, and a photo of the fitted reducer, and we confirm the -A / -B suffix before you order.

Online Inquiry

If you have any suggestions, please contact us

Contact Us
IT'S SUPPORTED BY

Copyright © SongWei Robotics All Rights Reserved  -  Privacy Policy