All Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

All Small Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

ABB 3HAC23857-001 Leather Protective Cover for Teach Pendant

Product Condition New original or used original. Please confirm the condition with us before ordering.
Shipping Information Worldwide shipping via DHL, FedEx, and UPS — 3-5 working days to most destinations. Packed with protective film and a reinforced carton.
Buyer Benefits
  • Genuine ABB 3HAC23857-001 leather protective cover for the teach pendant — also written 3HAC023857-001 with a leading zero.
  • Black soft leather outer with a clear window over the display, so the screen stays readable while the pendant is covered.
  • Side zip for fitting — the pendant goes in and comes out without being removed from the robot.
  • Keeps dust, oil, coolant and swarf off the pendant and absorbs the knocks that would otherwise crack the housing.
  • Fitment confirmed against the pendant on your robot: send us a photo of the pendant and the old cover, or the pendant article number.
  • The matching pendant can be quoted together with the cover, so a replacement set arrives in one shipment.
  • Each cover is checked for torn seams, a working zip and an undamaged window before packing.
Item Location Ships from Shanghai, China. Lead time confirmed with your inquiry.
Payment Information PayPal, T/T, and Alibaba Trade Assurance accepted. Send your inquiry for a quotation.
  • Description
Can’t Find Your Part?

12,000+ parts in stock,Tested before shipping,Reply within 24 hours

Inquiry

ABB 3HAC23857-001 Leather Protective Cover for Teach Pendant

ABB 3HAC23857-001 is the leather protective cover for the teach pendant — a black soft cover with a clear inspection window over the display area and a side zip for putting it on and taking it off. It keeps dust, oil, swarf and coolant off the pendant, and takes the knocks that would otherwise crack the pendant housing. Send us a photo of the pendant and the cover you are replacing, and we will confirm the match before you order.

Specifications

Category Teach pendant protective cover (soft leather cover with display window)
Brand ABB
Article Number 3HAC23857-001
Definition ABB OEM protective cover for the teach pendant, supplied in black soft leather with a clear window over the display area, a side zip for fitting, and an open collar at the top that closes around the pendant neck.
Construction Black leather outer with stitched seams, a clear flexible window over the display area, and a side zip that runs from the collar down the side so the pendant can be put in and taken out without removing it from the robot.
Function Keeps dust, oil, coolant and swarf off the pendant and its display, absorbs knocks and drops, and keeps the pendant usable in dusty or oily cells where a bare housing would be quickly marked up.
Series Compatibility ABB teach pendants. Send us the pendant article number or a photo of the pendant and the old cover, and we will confirm which pendant it fits before you order.
Article Number Note This article is also written 3HAC023857-001 with a leading zero. If your old cover or the pendant label carries that form, it is the same part — send us whatever number is on your unit and we will confirm it.
Pendants It Is Used With Ask us about the matching pendant at the same time — we can quote 3HAC028357-001 DSQC679 FlexPendant and 3HAC085590-001 FlexPendant DSQC3120A with the cover, so a replacement pendant arrives with a cover that fits.

Industrial Applications

  • Cells with heavy dust, swarf, oil mist or coolant where a bare teach pendant housing gets marked up within weeks.
  • Welding, casting and machining cells where spatter and grinding dust reach the robot and its accessories.
  • Keeping the pendant on the floor during programming instead of hanging it on a hook in the dust zone.
  • Protecting the display screen from scratches and from the impact of a pendant dropped on a workbench.
  • Spares provisioning: a spare cover kept at the cell, because a torn or missing cover is what stops people using the pendant properly.

Design Purpose

A teach pendant lives a harder life than the robot it programs. It is handled all shift, it is the one part of the cell that gets laid on a workbench, dropped on a ladder or left in a splash of coolant, and it has a screen that shows every scratch. ABB makes this cover in soft black leather for that reason: the leather takes the knocks and wipes clean, the clear window keeps the display readable while it is covered, and the side zip lets an engineer drop the pendant in and take it out again in seconds at the robot.

Because the cover is a shaped soft item, fitment is decided by the shape of the pendant it is cut for, not by a size or a mounting pattern — there is no bolt pattern to match. It is therefore identified by the article number and confirmed against the pendant on your robot, and it is worth replacing as a matched set with the pendant rather than mixing parts between units.

Common Failure Modes

  • Worn or torn leather at the seams and around the zip, from daily handling and abrasion.
  • A zip that no longer runs freely, so the cover cannot be opened without tearing the stitching.
  • Window scratched or clouded, which is what actually makes a pendant hard to read once it is in the cell.
  • Stiffened or degraded leather after long exposure to oil, coolant, heat or weld spatter.
  • Missing cover after service work, leaving the pendant exposed in a dusty or oily cell.
  • Fitting the wrong cover, because covers are shaped for one pendant and look similar across models.

Fitting and caring for it — what to check:

  • Stop the robot and put the controller in manual mode before working on the pendant or its cover.
  • Identify the pendant and the cover together. Confirm the article number on the pendant, or send us a photo of the pendant and the old cover, and we will confirm the match.
  • Open the side zip fully before sliding the pendant in, so the collar and stitching are not forced over the display.
  • Route the pendant cable through the collar so it is not pinched, and leave the enable-switch area and the screen clear of folds.
  • Check that the window sits over the display and that the collar closes around the pendant neck.
  • After fitting, switch the pendant on and check the screen is readable through the window before the cell goes back into production.

Why Choose Us

  • Specialized in industrial robot spare parts for ABB, FANUC, KUKA and YASKAWA.
  • Fitment confirmed against the pendant on your robot before we quote, so you receive a cover that goes on rather than one that only looks right.
  • We can quote the matching pendant together with the cover, so a replacement set arrives in one shipment.
  • Each cover is checked for torn seams, a working zip and an undamaged window before packing.
  • Multiple payment methods accepted — PayPal, T/T, and Alibaba Trade Assurance.

Related Products

  • ABB 3HAC028357-001 DSQC679 FlexPendant for IRC5 controllers — the pendant this cover fits.
  • ABB 3HAC085590-001 FlexPendant DSQC3120A — a different pendant generation; a different part from this one.
  • ABB JC2000-0049 joystick for the DSQC679 FlexPendant — a replaceable item inside the pendant.
  • More ABB parts in the ABB robot parts category.
  • Background on the pendant itself in the robot teach pendant guide.

Send us a photo of the pendant and the cover you are replacing, or the article number on the pendant, and the quantity you need. We will confirm the matching cover and give you a quotation.

Online Inquiry

If you have any suggestions, please contact us

Contact Us
IT'S SUPPORTED BY

Copyright © SongWei Robotics All Rights Reserved  -  Privacy Policy