All Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

All Small Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

YASKAWA HW1483880 Battery Pack BAT1 for YRC1000 Manipulator

Product Condition New original or used original. Please confirm the condition with us before ordering.
Shipping Information Ships from Shanghai, China. This unit contains a lithium battery (UN3091), so dangerous-goods transport rules apply — please contact our Shanghai office to arrange the shipping method and confirm the delivery schedule in your quotation. The cell, leads and connector are protected for transport.
Buyer Benefits
  • YASKAWA part number HW1483880 — the battery pack (BAT1) for YRC1000 robot manipulators, not a speed reducer or a drive component.
  • Full ordering number HW1483880-A, also catalogued as Motoman part 179528-1; the same pack is ordered under either number. The -A suffix is printed on the battery label and box.
  • Holds encoder absolute position and controller memory through a power interruption, so position data and programs are retained when mains power is off.
  • Fits YRC1000 and YRC1000micro manipulators on GP, AR, HC, PL and SP series robots. Send us the robot model and controller nameplate so we confirm the build.
  • Watch the separate power-off replacement cable 179529-1 / HW1471281-A: official service procedures call for it when the pack is changed with controller power off. It is a different part, ordered separately. Official YRC1000 procedures also list this pack as a set of three for one change — send us your robot model and we confirm the quantity.
  • After the pack is exchanged, keep the controller energised and follow the official battery replacement procedure for your robot model; back up programs and position data first, fit the new pack with the connector fully seated, then confirm the low-battery indication clears, verify absolute position data and run the YASKAWA home position calibration procedure for your controller if position was lost. Record the replacement date and repeat the check on the maintenance schedule.
  • New original or used original; we confirm the condition with you before you order.
  • Request a quote for current pricing and shipping arrangements – send the full number from the battery label, the robot model, the controller nameplate and a photo of the connector, and we confirm the version and quantity before you order.
Item Location Ships from Shanghai, China.
Payment Information PayPal / T/T / Alibaba Trade Assurance.
  • Description
Can’t Find Your Part?

12,000+ parts in stock,Tested before shipping,Reply within 24 hours

Inquiry

YASKAWA HW1483880 Battery Pack BAT1 for YRC1000 Manipulator

HW1483880 is the YASKAWA MOTOMAN battery pack (BAT1) for YRC1000 robot manipulators — it holds the encoder absolute position and controller memory while mains power is off. The full ordering number is HW1483880-A, also catalogued as Motoman part 179528-1. This is a lithium battery pack, not a speed reducer or a drive component. Two numbers cause most of the mix-ups on this part: the -A suffix on the battery label, and the separate battery replacement cable 179529-1 / HW1471281-A that official service procedures call for when the pack is changed with the controller powered down. Send us the full number from the battery label, the robot model, the controller nameplate and a photo of the connector, and we confirm the version and the quantity for your unit before you order.

Specifications

Part Number HW1483880
Full Ordering Number HW1483880-A — the -A suffix is printed on the battery label and appears on the box. It is part of the complete ordering number.
Motoman Part Number 179528-1 (Yaskawa Motoman recommended spare parts list). The same pack is ordered under either number.
Official Product Name BATTERY, PACK, (BAT1), YRC1000 MANIPULATOR
Manufacturer YASKAWA (original spare part)
Application / Controller YRC1000 and YRC1000micro manipulators, including GP, AR, HC, PL and SP series robots. Confirm the robot model and controller build from their nameplates.
Function Supplies backup power to the manipulator encoder and controller memory during a power interruption, so absolute position data and programs are retained
Construction / Photo The product photo shows a white box beside a cylindrical cell in a sealed clear enclosure with a black cap, red and black lead wires, a small white plug-in connector and a MOTOMAN HW1483880-A label on the cell.
Power-off Replacement Cable 179529-1 / HW1471281-A — a battery replacement cable used when the pack is changed with controller power off. A different part from this one, ordered separately.
Condition New original or used original. Please confirm the condition with us before ordering.

Official YRC1000 battery replacement procedures list this pack as a set of three for one change, and they specify the separate backup cable when the work is done with power off. That means a single cell is often not enough for the job. Send us the full number from the battery label, the robot model, the controller nameplate and a photo of the connector, and we confirm the version and quantity before we quote.

Industrial Applications

  • Scheduled battery replacement on YASKAWA MOTOMAN YRC1000 and YRC1000micro manipulators.
  • Restoring encoder absolute position and memory retention after a low-battery alarm or a long power interruption.
  • Planned maintenance on GP, AR, HC, PL and SP series robot cells in welding, palletising, handling and assembly lines.
  • Rebuilding a used robot or relocating a cell where the original battery set is missing or past its service date.
  • Correcting a spares list that records this number as a speed reducer when the fitted item is the manipulator battery pack.

Design Purpose

  • A sealed lithium battery pack with a pre-fitted lead and plug-in connector, so the cell is exchanged without field wiring or soldering.
  • A defined BAT1 position in the YRC1000 manipulator, so the backup supply reaches the encoder and memory circuits it protects.
  • A non-rechargeable cell sized for long standby service, so position data survives power interruptions and maintenance shutdowns.
  • A single ordering number shared by the YASKAWA part number and the Motoman spare parts number, so the pack can be sourced from either list.
  • A separate service cable for power-off replacement, so position data can be held during an exchange when the controller must be de-energised.

Common Failure Modes

  • After the pack is exchanged, keep the controller energised and follow the official battery replacement procedure for your robot model; if the work must be done with power off, use the separate backup cable 179529-1 / HW1471281-A to hold encoder power. Back up programs and position data before starting, fit the new pack with the connector fully seated, then confirm the low-battery indication clears, verify the absolute position data and run the YASKAWA home position calibration procedure for your controller if the position was lost. Record the replacement date and repeat the check on the maintenance schedule.
  • Low-battery indication does not clear after a change — with the controller energised, check that the connector is fully seated and the cell is the correct number, then send us a photo of the battery label and connector so we confirm the version.
  • Absolute position data or programs are lost after a power-off change — restore from the backup taken before the work and run the home position calibration procedure for your controller. Send us the controller nameplate so we confirm the correct procedure for that build.
  • Only one cell is ordered for a change — official YRC1000 procedures list a set of three. Send us the robot model and we confirm the quantity for your unit.
  • A replacement cable is expected to be included with the pack — 179529-1 / HW1471281-A is a different part. Tell us whether your change is done with power on or off and we quote the items you need.
  • The part is ordered from a "speed reducer" listing — this is a manipulator battery pack, not a gear unit. Send us a photo of the fitted item and we confirm it.

Why Choose Us

  • Supplied against YASKAWA part number HW1483880-A / Motoman 179528-1, with the -A suffix and connector matched to your robot before packing.
  • We check the full number on the battery label, the robot model, the controller nameplate and a photo of the connector before we quote.
  • New original or used original — the condition is confirmed with you before you order.
  • Photos of the actual pack, its label, enclosure, leads and connector provided on request.
  • Shipping for lithium battery units is arranged from Shanghai under dangerous-goods rules, with the method and schedule confirmed in your quotation.

Related Products

Request a quote for current pricing and shipping arrangements – send us the full number from the battery label, the robot model, the controller nameplate and a photo of the connector, and we confirm the version and quantity before you order.

Online Inquiry

If you have any suggestions, please contact us

Contact Us
IT'S SUPPORTED BY

Copyright © SongWei Robotics All Rights Reserved  -  Privacy Policy