All Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

All Small Categorys

ABB Robot Parts
KUKA Robot Parts
FANUC Robot Parts
YASKAWA Robot Parts

ABB 3HAC023278-001 Cable Signal Ax 7 for IRB 6400

Product Condition New original or used original. Please confirm the condition with us before ordering.
Shipping Information Ships from Shanghai, China. Delivery lead time: 3-5 working days after order confirmation. Worldwide delivery by DHL / FedEx / UPS, with both connector ends protected in transit so the cable arrives ready to fit.
Buyer Benefits
  • ABB article number 3HAC023278-001, catalogued as "Cable signal ax 7" — the signal cable for the seventh (external) axis of the ABB IRB 6400 in S4C-family systems.
  • ABB publishes a 2070 mm (2.07 m) product net length and 0.3 kg net and gross weight for this article, with China (CN) as the country of origin, customs tariff number 85444290 and a minimum order quantity of 1 piece.
  • ABB's product categories place this spare part under Robotics → Robots → Articulated Robots → IRB 6400, so the number on your parts list matches the robot it was built for.
  • A different part from the 30 m cabinet harness: ABB "Harness-CP/CS/PBUS 30m" is article 3HAC022988-003, 30 000 mm and 16.51 kg, listed for the IRC5 controller. This one is the short axis 7 signal lead.
  • The related number 3HAC069646-001 is listed in this article's ABB data sheet; send us either number and we confirm the version for your robot before you order.
  • Supplied as a coiled black twin-lead cable with a white DataMatrix label on the jacket and both connector ends sealed in red transit protection sleeves.
  • After the cable is exchanged, update the revolution counters: lock out and tag out the controller, reseat both ends of the serial measurement link, then on the FlexPendant go to Calibration → Rev. Counters → Update Revolution Counters with every axis on its calibration mark, and verify the external axis position.
  • Supplied as new original or used original; we confirm the condition with you before you order.
  • Request a quote for current pricing and lead time – send the number from your cable label, the robot model and controller type, and photos of both connector ends, and we confirm the match before you order.
Item Location Ships from Shanghai, China.
Payment Information PayPal / T/T / Alibaba Trade Assurance.
  • Description
Can’t Find Your Part?

12,000+ parts in stock,Tested before shipping,Reply within 24 hours

Inquiry

ABB 3HAC023278-001 Cable Signal Ax 7 for IRB 6400

3HAC023278-001 is the ABB Cable signal ax 7, the 2.07 m signal cable for the seventh (external) axis of the ABB IRB 6400 robot in S4C-family systems. ABB's catalogue description and invoice description both read "Cable signal ax 7", and ABB places this spare part under Robotics → Robots → Articulated Robots → IRB 6400. The ABB article called Harness-CP/CS/PBUS 30m is a different article, 3HAC022988-003, a 30 m IRC5 controller harness with a published length of 30 000 mm and a net weight of 16.51 kg. This one is the short axis 7 signal lead. Send us the number from your cable label, the robot model and controller type, or a photo of both connector ends, and we confirm the match before you order.

Specifications

Part Number 3HAC023278-001
Product Name Cable signal ax 7 (ABB catalogue description, invoice description and product name)
Product Type Signal cable for the seventh (external) axis measuring circuit; a 7th axis / serial cable, not one of the six manipulator axis harnesses
Robot Family ABB IRB 6400. ABB's product categories place this spare part under Robotics → Robots → Articulated Robots → IRB 6400, and the S4C-family IRB 6400 is the listed application.
Cable Length 2070 mm (2.07 m), ABB published product net length
Related Article Number 3HAC069646-001 is listed in the ABB data sheet for this article under Replaced Product ID (OLD). Send us either number and we confirm the version for your robot before you order.
Construction Coiled black twin-lead cable with a white DataMatrix label on the jacket. Both connector ends are sealed inside red transit protection sleeves in the product photo; send us photos of both ends so we can match the connectors to your installation.
ABB Published Data For 3HAC023278-001, ABB publishes 0.3 kg net and gross weight, 2070 mm product net length, China (CN) as the country of origin, customs tariff number 85444290 and a minimum order quantity of 1 piece. The version and packing of the cable in your quote are confirmed with you before the order is placed.
Separate 30 m Article Harness-CP/CS/PBUS 30m is ABB article 3HAC022988-003: 30 000 mm long, 16.51 kg, listed as a spare part for the IRC5 controller. A different part from this one.
Condition New original or used original. Please confirm the condition with us before ordering.

Two numbers cause most of the mix-ups here. One is the 30 m cabinet harness, 3HAC022988-003, which belongs to a different ABB article and a different controller generation. The other is 3HAC069646-001, the related number listed in this article's ABB data sheet. Send us the number on your cable label, the robot model and controller type, and a photo of both connector ends, and we confirm the exact cable before we quote.

Industrial Applications

  • Replacing a damaged or intermittent axis 7 signal lead on ABB IRB 6400 robots working with an external axis, such as a track, a positioner or an indexing table.
  • Restoring serial measurement communication after a conductor break at a flex point, a damaged connector at the external-axis unit, or chafing along the cable run.
  • Rebuilding a used IRB 6400 cell or an external-axis stand where the original signal lead is missing or has been cut to length in the field.
  • Service stock for maintenance teams and integrators running several S4C-family IRB 6400 cells with external axes from one spares inventory.
  • Correcting a spares list that calls out the 30 m IRC5 cabinet harness when the fitted part is the 2.07 m axis 7 signal lead.

Design Purpose

  • A published 2070 mm length matched to the axis 7 signal run, so there is no surplus cable to coil and chafe inside the cell.
  • A dedicated signal lead for the external-axis measuring circuit, kept on its own route away from motor power cabling during installation.
  • Both connector ends sealed in transit protection sleeves, so the cable arrives with the plugs clean and ready to fit.
  • A white DataMatrix label on the jacket that carries the article identity; a photo of it is all we need to confirm the number on your fitted cable.
  • A 0.3 kg assembly that one engineer can route and exchange in a single planned stop.

Common Failure Modes

  • After the cable is exchanged, update the revolution counters — lock out and tag out the controller, reseat both ends of the serial measurement link, power up, then on the FlexPendant go to Calibration → Rev. Counters → Update Revolution Counters with every axis jogged exactly onto its calibration mark, and verify the external axis position before returning to production.
  • Intermittent position or communication faults on the external axis — with the power off, inspect the jacket at every flex point, check both connector seats and pins, and confirm the shield and ground bonding before ordering a new cable.
  • A 30 m cabinet harness is ordered instead — Harness-CP/CS/PBUS 30m is ABB article 3HAC022988-003 for the IRC5 controller. Check the length and the article number on your parts list before the order is placed.
  • The seventh axis is confused with the six manipulator axes — this lead serves the external axis measuring circuit. Confirm the external axis configuration in your controller before ordering.
  • An older parts list carries 3HAC069646-001 — this number is listed in the ABB data sheet for the current article. Send us the number from your list and we confirm the version before you order.
  • The jacket label or DataMatrix code is worn — send us a photo of the label, both connector ends and the robot and controller nameplates, and we identify the cable for you.

Why Choose Us

  • Supplied against ABB article 3HAC023278-001, catalogued as Cable signal ax 7 for the IRB 6400 and published at 2.07 m and 0.3 kg.
  • We match the order against the number on your cable label, the robot model and controller type, and photos of both connector ends, before packing.
  • New original or used original — the condition is confirmed with you before you order.
  • Photos of the actual cable, its DataMatrix label and both connector ends provided on request.
  • Packed for export from Shanghai with both connector ends protected, and shipped worldwide.

Related Products

  • 3HAC022988-003 — ABB Harness-CP/CS/PBUS 30m, a 30 m IRC5 controller harness. A different part from this one, under its own article number.
  • 3HAC069646-001 — the related number listed in this article's ABB data sheet. Send us either number and we confirm the version for your robot.
  • 3HAC15619-1 — ABB cable FB7 SMB 17. A different part from this one.
  • 3HAC029834-008 — ABB cable signal J1.SMB R1.SMB chain, 13 m. A different part from this one.
  • 3HAC046277-001 — ABB serial measurement unit (SMB). A different part from this one.
  • ABB revolution counter update guide — the calibration steps to run after the serial measurement link has been disturbed.
  • ABB Cables & Dress Packages — the rest of the ABB robot cable range.

Request a quote for current pricing and lead time – send us the number from your cable label (3HAC023278-001 or the related 3HAC069646-001), the robot model and controller type, and photos of both connector ends, and we confirm the match before you order.

Online Inquiry

If you have any suggestions, please contact us

Contact Us
IT'S SUPPORTED BY

Copyright © SongWei Robotics All Rights Reserved  -  Privacy Policy