ABB 3HAC028357-001 DSQC679 FlexPendant for IRC5 Controllers

Teach Pendant for ABB IRC5 Controllers

Specifications

Industrial Applications

• Handheld programming and jogging on ABB IRC5 robot cells during setup, commissioning and changeover.
• Daily operator use on production lines — teaching paths, editing programs, testing cycles and clearing faults at the workstation.
• Maintenance and service work on IRC5-controlled robots in automotive, metal processing, material handling, electronics assembly and general automation cells.
• Replacing a pendant damaged by drops, cable strain or worn safety switches.
• Spares provisioning for IRC5 fleets, where the pendant is handled on every shift and is one of the most frequently damaged items on the cell.

Design Purpose

• Give the operator full manual control of the robot from the cell: jog axes, run and step programs, edit positions and set parameters.
• Carry the safety functions required for manual operation — an emergency stop button and a three-position enabling device — in the operator's hand.
• Present controller status, I/O state and fault messages at the workstation, so diagnosis does not require returning to the controller cabinet.
• Survive daily industrial handling, with an IP54-rated housing suited to shop-floor use.

Common Failure Modes

• Cracked or unresponsive touchscreen, typically after a drop or impact — the pendant may still power up but cannot be operated.
• Joystick drift or a dead jog direction, so the robot creeps without input or one axis cannot be jogged.
• Cable and connector failure at the bending point, giving intermittent contact or a "pendant disconnected" condition.
• Worn emergency stop or enabling-device switches, causing unexpected safety stops and blocking manual operation.
• Power-up or communication failure between the pendant and the controller, sometimes linked to a RobotWare version mismatch.
• Ordering the wrong item, because reseller listings describe this code inconsistently, or because the pendant is being bought for an S4C+ or OmniCore controller.

Why Choose Us

• Identity confirmed as the ABB DSQC679 FlexPendant for IRC5 controllers against multiple independent sources, not against a reseller description.
• We tell you what is not confirmed — display size, weight and RobotWare level for this code are published inconsistently, and we do not pass those figures on as fact.
• Generation check before supply: send us your controller model and we confirm whether this is the right pendant for it.
• Supplied as new original or used original; we confirm the condition with you before you order.
• Technical support for part identification, installation questions and fault diagnosis.
• Carefully packed and shipped worldwide from Shanghai, China via DHL / FedEx / UPS.

Related Products

• 3HAC085590-001 — ABB FlexPendant DSQC3120A, a later pendant generation for IRC5. A different article; confirm which generation your controller supports before ordering.
• 3HAC085598-001 — SxTPU4 FlexPendant with 10 m cable, DSQC3120, for IRC5 and not for OmniCore. A different article; confirm compatibility separately.
• 3HAC021914-001 — jumper plug used on ABB teach pendant connections.
• JC2000-0137 — joystick assembly used in ABB teach pendant repair.

Send us your controller model and RobotWare version and we will quote this pendant together with the cable, joystick or jumper plug your cell needs.