ABB 3HAC085598-001 SxTPU4 10M FlexPendant Teach Pendant

Product Condition	New original or used original. Please confirm the condition with us before ordering.
Shipping	Ships from Shanghai, China. Delivery lead time: 3-5 working days after order confirmation. Worldwide delivery by DHL / FedEx / UPS with secure packaging.
Buyer Benefits	Genuine ABB SxTPU4 10M FlexPendant (Article 3HAC085598-001, Product Code DSQC3120) — an IRC5 teach pendant supplied with a 10 m cable. For ABB IRC5 robot controllers (FlexPendant DSQC3120 family); IRC5-only, not compatible with OmniCore — we confirm your controller generation before supply. Built for robot programming, manual jogging, commissioning and maintenance, with emergency stop and the three-position enabling device. Supplied as new original or used original; condition confirmed with you before ordering. Inquiry-based supply: share your controller model and generation so we match the correct FlexPendant revision. Cross-checked against the DSQC3120A FlexPendant (3HAC085590-001) and our other teach-pendant spares to avoid mismatched revisions.
Item Location	Ships from Shanghai, China.
Payment	PayPal / T/T / Alibaba Trade Assurance.

Inquiry Contact Us

12,000+ parts in stock，Tested before shipping，Reply within 24 hours

+86-18616903058

[email protected]

Inquiry

Description

Category	ABB IRC5 Teach Pendant / FlexPendant Operator Panel
Brand	ABB
Product Name	SxTPU4 10M FlexPendant
Part Number	3HAC085598-001
Product Code	DSQC3120
Function	Handheld operator panel (teach pendant) for IRC5 robot control — robot programming, manual jogging, commissioning and maintenance.
Controller Compatibility	ABB IRC5 controllers (FlexPendant DSQC3120 family). IRC5-only; not compatible with OmniCore controllers.
Cable Length	10 m (SxTPU4 10M configuration).
Part Type	New (supplied new original or used original per order confirmation).
Detailed Technical Parameters	Net weight, origin and tariff are not consistently documented across sources — confirm by part nameplate or provide the robot serial number. Verify the exact pendant revision and RobotWare/controller software before supply.

Robot programming and path teaching on the shop floor.
Manual jogging and position adjustment during commissioning and calibration.
Production support: program control, status screens and safe local intervention.
Maintenance and fault recovery: reading events, confirming I/O behaviour and isolating issues faster than a controller-only approach.
Process optimization: incremental path edits and cycle-time tuning without disrupting the engineering toolchain.

Provide the handheld human-machine interface that makes IRC5 manual-mode tasks practical and safe.
Combine touchscreen, joystick, emergency stop and the three-position enabling device in one operator unit.
Give maintenance teams a standardized 10 m-reach pendant across multiple IRC5 cells.
Reduce recovery time when production stops by enabling fast, local manual control.

Safety & Installation Notice

Verify the controller generation before supply — this FlexPendant is for IRC5 (DSQC3120 family) and is NOT compatible with OmniCore controllers.
Follow lockout/tagout before any pendant or controller work; the pendant is a safety-critical device with E-stop and enabling device.
Functionally test the E-stop and three-position enabling device after installation before returning the cell to production.
Confirm RobotWare/controller software compatibility with the pendant revision; mismatched revisions can block boot or limit functions.
Handle with care: the touchscreen tolerates typical shop-floor conditions but avoid solvents and impact; use touchscreen-compatible gloves if required.
Calibrate and verify the jog function in a safe, enclosed space after replacement.

Generation mismatch: using an IRC5 FlexPendant on an OmniCore controller (or vice versa) causes no communication — confirm the generation.
Revision mismatch: DSQC3120 vs DSQC3120A or other revisions may not be directly interchangeable — verify the exact article and software.
Cable or connector damage: the 10 m cable and connector are wear points; inspect for cuts, kinks and bent pins.
E-stop / enabling device fault: a worn enabling switch or stuck E-stop prevents manual motion — functional test after install.
Touchscreen or joystick drift: unresponsive touch or joystick offset affects jogging accuracy — verify before production.

Genuine ABB SxTPU4 10M FlexPendant verified by article number and product code DSQC3120, not guessed.
Controller generation confirmed (IRC5 / FlexPendant DSQC3120 family) before we quote.
Supplied as new original or used original; condition is confirmed with you before ordering.
Cross-checked against the DSQC3120A FlexPendant (3HAC085590-001) and other teach-pendant spares to avoid mismatched revisions.
Inquiry-based supply: share your controller model and RobotWare level so we match the correct pendant.

*Title

*Name

*E-mail

Tel

Company Name

*Content